VIP1-1B-03 is a single-phase 3A EMI power filter supporting 115/250VAC with 50/60Hz operating frequency. It features low leakage current and wide working temperature range from -25℃ to 100℃. This single-stage filter can effectively suppress both common-mode and differential-mode noise on power lines. It passes strict high voltage and insulation resistance tests to guarantee stable and safe performance. Widely used for PLC, servo drives, inverters and other industrial automation equipment, it helps devices meet EMC standards and avoid unexpected malfunctions caused by power interference.

3‑in‑1 integrated design: IEC inlet socket + power switch + dual fuses, saves internal equipment space
Rated current: 3A RMS, rated voltage 115/250VAC for single‑phase AC 50/60Hz power system
Built‑in single‑stage LC filter circuit, suppresses both common‑mode & differential‑mode EMI interference
Ultra‑low leakage current: max 0.1mA@115VAC/60Hz; max 0.2mA@250VAC/50Hz, safe for end‑user touch
High insulation resistance ≥100MΩ @500VDC between input/output and ground terminal

Reliable VIIP original manufacture, model number: VIP1‑1E‑03, part code B011X0752
Insertion loss for EMI noise attenuation, reducing power‑line disturbance to sensitive circuits
Standard IEC C14 inlet compatible with common AC power cords in global markets
Integrated power switch cuts off L/N lines simultaneously for safe power disconnection
Dual‑fuse safety design providing double insurance for over‑current fault protection

Reinforced circuit internal layout reduces the risk of parasitic coupling interference inside the filter module
Dual‑fuse structure protects both live and neutral lines, improving equipment safety against short‑circuit hazards
Standard panel cut‑out dimension compatible with most industrial equipment housing design specifications
Built-in resistor bleeder circuit safely releases residual voltage after power‑off for better maintenance safety
Stable filtering performance under long‑term continuous operation, suitable for 24‑hours non‑stop running devices
Pre‑verified electrical performance per Rev4.0 specification, supporting customers' EMC pre‑test & certification applications

Reliable VIIP original manufacture, model number: VIP1‑1E‑03, part code B011X0752
Insertion loss for EMI noise attenuation, reducing power‑line disturbance to sensitive circuits
Standard IEC C14 inlet compatible with common AC power cords in global markets
Integrated power switch cuts off L/N lines simultaneously for safe power disconnection
Dual‑fuse safety design providing double insurance for over‑current fault protection

Reliable VIIP original manufacture, model number: VIP1‑1E‑03, part code B011X0752
Insertion loss for EMI noise attenuation, reducing power‑line disturbance to sensitive circuits
Standard IEC C14 inlet compatible with common AC power cords in global markets
Integrated power switch cuts off L/N lines simultaneously for safe power disconnection
Dual‑fuse safety design providing double insurance for over‑current fault protection

VIP1-1B-03(B011X0423) is a single stage single phase AC EMI power filter with rated current of 3A RMS and rated voltage of 115/250VAC for 50/60Hz mains supply. It features ultra low leakage current design with maximum 2uA at 115VAC 60Hz and 5uA at 250VAC 50Hz, which is ideal for medical and precision electronic equipment.
This filter passes 1 minute hipot test of 2000VAC line to ground and 500VDC line to line. Its insulation resistance reaches over 100M ohm under 500VDC, and the working temperature ranges from minus 25 degree Celsius to plus 100 degree Celsius. It delivers stable common mode noise attenuation under 50 ohm test system to suppress conducted electromagnetic interference on AC power lines. It helps end products meet EMC standards and ensures safe and reliable operation for medical monitoring instruments, laboratory measuring devices and other sensitive electronic systems.

VIP1-1B-03(B011X0423) is a single stage single phase AC EMI power filter with rated current of 3A RMS and rated voltage of 115/250VAC for 50/60Hz mains supply. It features ultra low leakage current design with maximum 2uA at 115VAC 60Hz and 5uA at 250VAC 50Hz, which is ideal for medical and precision electronic equipment.
This filter passes 1 minute hipot test of 2000VAC line to ground and 500VDC line to line. Its insulation resistance reaches over 100M ohm under 500VDC, and the working temperature ranges from minus 25 degree Celsius to plus 100 degree Celsius. It delivers stable common mode noise attenuation under 50 ohm test system to suppress conducted electromagnetic interference on AC power lines. It helps end products meet EMC standards and ensures safe and reliable operation for medical monitoring instruments, laboratory measuring devices and other sensitive electronic systems.

VIP1-1B-03(B011X0423) is a single stage single phase AC EMI power filter with rated current of 3A RMS and rated voltage of 115/250VAC for 50/60Hz mains supply. It features ultra low leakage current design with maximum 2uA at 115VAC 60Hz and 5uA at 250VAC 50Hz, which is ideal for medical and precision electronic equipment.
This filter passes 1 minute hipot test of 2000VAC line to ground and 500VDC line to line. Its insulation resistance reaches over 100M ohm under 500VDC, and the working temperature ranges from minus 25 degree Celsius to plus 100 degree Celsius. It delivers stable common mode noise attenuation under 50 ohm test system to suppress conducted electromagnetic interference on AC power lines. It helps end products meet EMC standards and ensures safe and reliable operation for medical monitoring instruments, laboratory measuring devices and other sensitive electronic systems.

VIP1-1B-03(B011X0423) is a single stage single phase AC EMI power filter with rated current of 3A RMS and rated voltage of 115/250VAC for 50/60Hz mains supply. It features ultra low leakage current design with maximum 2uA at 115VAC 60Hz and 5uA at 250VAC 50Hz, which is ideal for medical and precision electronic equipment.
This filter passes 1 minute hipot test of 2000VAC line to ground and 500VDC line to line. Its insulation resistance reaches over 100M ohm under 500VDC, and the working temperature ranges from minus 25 degree Celsius to plus 100 degree Celsius. It delivers stable common mode noise attenuation under 50 ohm test system to suppress conducted electromagnetic interference on AC power lines. It helps end products meet EMC standards and ensures safe and reliable operation for medical monitoring instruments, laboratory measuring devices and other sensitive electronic systems.

VIP1-1B-03(B011X0423) is a single stage single phase AC EMI power filter with rated current of 3A RMS and rated voltage of 115/250VAC for 50/60Hz mains supply. It features ultra low leakage current design with maximum 2uA at 115VAC 60Hz and 5uA at 250VAC 50Hz, which is ideal for medical and precision electronic equipment.
This filter passes 1 minute hipot test of 2000VAC line to ground and 500VDC line to line. Its insulation resistance reaches over 100M ohm under 500VDC, and the working temperature ranges from minus 25 degree Celsius to plus 100 degree Celsius. It delivers stable common mode noise attenuation under 50 ohm test system to suppress conducted electromagnetic interference on AC power lines. It helps end products meet EMC standards and ensures safe and reliable operation for medical monitoring instruments, laboratory measuring devices and other sensitive electronic systems.

Compact diamond‑shape outline, easy to arrange inside limited space of power cabinet and machine housing
 Tinned wire end for convenient crimping or terminal connection during system integration
Suitable for equipment retrofitting upgrade, easy to add noise‑suppression function for existing machines
 Strict raw‑material screening, guarantees long service life even for continuous industrial operation