High-performance magnetic core component, stable inductance value, avoid magnetic saturation under rated working current
Clear warning marking printed on housing, reminds users to use 250V rated fuse for correct safe application
Complete official approval sheet Rev4.0 documentation supplied, support customer incoming quality audit
Strict hi-pot high-voltage test passed for 1 minute, guarantee high dielectric strength and electrical safety

Bidirectional filtering performance: blocks grid noise into device and restrains internal noise feedback to power mains
High insulation resistance ≥100MΩ @500VDC between input/output to ground
Wide operating temperature range: -25℃ to +100℃, adapts to high-temperature inner-chassis working environment
Standard 6.3mm fast-on tab terminals, convenient for quick crimp wiring during mass production assembly
Double-fuse safety protection on both L & N lines, provides over-current and short-circuit dual-side protection

3-in-1 integrated design: IEC-C14 power inlet, double fuses and power switch combined into one compact unit, saving internal equipment space
Panel-mount installation style, fixed via mounting holes on flange, easy for front-panel assembly for end devices
Rated 6A 115/250VAC single-phase AC, works stably under 50/60Hz mains power supply
Ultra-low leakage current: max 2μA@115VAC 60Hz, max 5μA@250VAC 50Hz, suitable for high-safety requirement equipment
Excellent common-mode & differential-mode noise attenuation, effectively suppress conducted EMI interference on AC power lines
Compact panel‑mount form factor: Front‑panel mounting structure with standard fast‑on terminals (6.3 mm, T=0.8 mm), convenient for cabinet and device integration.
Robust electrical safety performance: Insulation resistance ≥100 MΩ @500 VDC, qualified high‑potential withstand test performance. Wide operating temperature range from ‑25 °C to +100 °C for stable operation under harsh ambient conditions.
Compliance:

3‑in‑one integrated dual‑fuse design: IEC inlet, switch and dual independent fuse holders integrated into single assembly; dual‑fuse redundant protection enhances over‑current safety and simplifies mechanical assembly.
Ultra‑low leakage current: Max 2 μA @115VAC/60Hz, max 5 μA @250VAC/50Hz, suitable for applications with strict safety requirements such as medical instruments.
Excellent EMI suppression: Optimized LC filter network delivers high insertion loss under 50‑ohm test system, effectively attenuating power‑line electromagnetic interference over broadband frequency range.
Compact panel‑mount form factor: Front‑panel mounting structure with standard fast‑on terminals (6.3 mm, T=0.8 mm), convenient for cabinet and device integration.
Robust electrical safety performance: Insulation resistance ≥100 MΩ @500 VDC, qualified high‑potential withstand test performance. Wide operating temperature range from ‑25 °C to +100 °C for stable operation under harsh ambient conditions.
Compliance:

Built-in power on/off switch for convenient local power cut-off without extra external switch components
Compact outline dimensions minimize occupation of equipment panel and inner cabinet space
Metal shielding housing improves anti-radiation interference capability and strengthens overall EMC performance
Mature LC passive filter circuit with no extra power consumption and low heat generation during normal operation

Pre-wired internal circuit, no extra wiring work between socket, switch and filter
VIIP original manufacturing, stable batch consistency, support sample testing & mass production order
Compact form factor optimizes enclosure layout for space-constrained electronic devices
Strict factory hipot high-voltage test ensures dielectric safety for each production batch
Effectively prevents internal equipment noise feedback back to AC mains power grid
Standardized panel cutout dimension, compatible with most mainstream device housing designs
Robust metal housing structure resists mechanical vibration for industrial onsite applications

Rated 6A RMS @115/250VAC, compatible with global 50/60Hz single‑phase mains power supply
Low leakage current design, meets safety requirement for commercial & industrial electronic devices
High insulation resistance ≥100MΩ @500VDC, reliable dielectric strength for long‑term operation
Wide operating temperature -25℃ ~ +85℃, stable performance under harsh working environment
Built‑in bleeder resistor, safely release residual voltage after power‑off

Pre-wired internal circuit, no extra wiring work between socket, switch and filter
VIIP original manufacturing, stable batch consistency, support sample testing & mass production order
Compact form factor optimizes enclosure layout for space-constrained electronic devices
Strict factory hipot high-voltage test ensures dielectric safety for each production batch
Effectively prevents internal equipment noise feedback back to AC mains power grid
Standardized panel cutout dimension, compatible with most mainstream device housing designs
Robust metal housing structure resists mechanical vibration for industrial onsite applications

Separated input-output circuit layout lowers crosstalk and enhances filtering performance
Optimized insertion loss performance to help end products pass EMC certification tests
Integrated rocker switch supports direct main-circuit power on/off without extra switch component
Available for sample validation, small-batch trial orders and large-volume mass production
Designed for single-phase AC mains, widely adaptable for commercial and office electronic hardware

Single-stage LC filter topology with excellent attenuation for common-mode and differential-mode interference within 150kHz-30MHz frequency band
Compact metal shielded enclosure with mounting holes for convenient chassis installation and good shielding performance against external EMI disturbance
Compliant with RoHS & REACH environmental requirements, halogen-free material; CE safety certification available
Bidirectional noise suppression: protects equipment from grid noise and reduces equipment emission back to power lines
Stable electrical performance, low leakage current, suitable for long-term continuous operation in commercial and light-industrial environments
Cost-effective general-purpose solution for EMC rectification of AC powered electronic devices

Compact diamond‑shape outline, easy to arrange inside limited space of power cabinet and machine housing
 Tinned wire end for convenient crimping or terminal connection during system integration
Suitable for equipment retrofitting upgrade, easy to add noise‑suppression function for existing machines
 Strict raw‑material screening, guarantees long service life even for continuous industrial operation

Flexible lead‑wire connection mode, adapts for various installation scenarios without fixed socket limitation
Reduces total BOM component count, integrates complete filtering function within one compact module
Maintains stable filtering capability under continuous long‑time full‑load working condition
Helps end equipment improve EMC performance to satisfy noise‑reduction test requirements
Mature mass‑production design with standardized manufacturing process, delivers consistent batch‑to‑batch quality