The world's leading manufacturer of power filters.

VIP4‑2B‑20(B042Q0707) VIIP 20A AC EMI Power Filter Chassis‑Mount Type 115/250VAC Low Leakage Current EMC Filter for Automation Instrument Test & Measurement Equipment Power Supply 1

VIP4‑2B‑20(B042Q0707) VIIP 20A AC EMI Power Filter Chassis‑Mount Type 115/250VAC Low Leakage Current EMC Filter for Automation Instrument Test & Measurement Equipment Power Supply

20A AC EMI Power Filter Chassis-Mount 115/250VAC EMC Filter

The VIP4‑2B‑20 is a VIIP single‑phase two‑stage EMI power filter designed for AC mains power systems at 115/250VAC, rated for 20A maximum RMS current. Built with metal shielded housing and screw‑type terminals, this filter suppresses both common‑mode and differential‑mode conducted electromagnetic noise on power lines, delivering clean power for sensitive electronic equipment. It complies with RoHS & REACH requirements, supports broad‑band noise attenuation under 50‑ohm test system, and fits chassis‑mount installation for industrial and commercial devices.

Inquiry

Write a Review

Single‑Phase Two‑Stage EMI RFI Power Line Filter VIP4‑2B‑20(B042Q0707),20A 115/250VAC 50‑60Hz High Insulation Resistance Conducted Noise Reduction Filter for EMC Compliance Testing

Product Overview

VIP4‑2B‑20 (B042Q0707) is a VIIP single-phase two-stage AC EMI filter rated 20A RMS, operating at 115/250VAC, 50/60Hz. This chassis mount filter cleans up power line disturbances, cuts down common-mode and differential-mode high-frequency noise from AC mains. It stabilizes input power quality for power conversion systems and prevents equipment-generated noise from leaking back to the utility grid. It meets global environmental standards and delivers consistent filtering performance for continuous power applications.

Product Highlights

Two-stage filter construction for balanced common-mode & differential-mode noise attenuation
20A high current rating to support heavy-load electronic equipment
Carefully controlled leakage current for safety certification of end machines
High insulation resistance to avoid short-circuit risks in compact enclosures
Integrated metal shielding reduces noise coupling inside the equipment cabinet
Broad temperature tolerance for different working environments
Chassis mount design with screw terminals, fast assembly and wiring

Applications

OEM industrial control machines and automation controllers
Medical auxiliary electronic equipment (non-life-support)
Large LED display and signage control systems
Audio-visual multimedia and commercial display devices
Security monitoring and access control systems
Compact electronic equipment with limited internal cabinet space

Electrical Characteristics

Item	Specifications
Model	VIP4‑2B‑20 (B042Q0707)
Rated Voltage	115 / 250 VAC
Rated Current	20A RMS Max.
Operating Frequency	50 / 60 Hz
Max. Leakage Current (Line‑to‑Ground)	0.5mA Max @115VAC /60Hz 1.0mA Max @250VAC /50Hz
Hi‑pot Test	1 minute withstand (refer to datasheet)
Insulation Resistance	≥100MΩ @ 500VDC (Input / Output to Ground)
Operating Temperature Range	‑25°C ~ +100°C
Insertion Loss	Measured under 50‑Ohm test system *Data for reference only

Electrical Schematic & Product Images

Support and Services

Product Overview: High-performance single-phase EMI filter, compliant with international standards
Technical Support: Refer to the datasheet and installation manual for full specs, wiring diagrams, and safety guidelines
Installation: Must be performed by qualified personnel; ensure proper grounding and secure connections per applicable electrical codes
Maintenance: Regular inspection recommended to maintain filter efficiency and extend product lifespan
Troubleshooting: Verify wiring, check for physical damage, and confirm operating conditions (temperature/humidity) meet specifications
Custom Solutions: Tailored EMI filter options available, including product testing and certification support. Contact our technical team for application advice and problem resolution

Frequently Asked Questions

What is your MOQ for VIP4-series power filters?

For standard off-the-shelf VIP4 series models, low MOQ is acceptable. Stock items support small-batch trial orders; for bulk mass production orders, MOQ will be based on production arrangement. Contact our sales team for detailed MOQ information.

Can I get samples of VIP4-series filters for my internal EMC performance pre-test?

Yes, sample service is available. Standard VIP4 models can be supplied as samples for your lab EMC validation and performance verification. Sample freight will be borne by the buyer.

What are the rated voltage, rated current and operating frequency for VIP4-series power filters?

VIP4 series single-phase filters are rated at 115/250VAC, operating frequency 50/60Hz. Different part numbers support different rated current from 1A-10A (for example VIP4-2B-10 is 10A model). Please refer to the product approval sheet for exact parameter of each model.

Can you provide insertion-loss curves including common-mode and differential-mode performance for VIP4-series filters?

Yes. Insertion-loss data under 50Ω standard test system is included in each model's approval sheet. We can provide test curves for common-mode and differential-mode noise attenuation for your circuit simulation and EMC evaluation.

What is the hip-pot (high-potential) test standard for VIP4-series power filters?

Every finished VIP4 filter undergoes hip-pot withstand voltage test for 1 minute as per specification, together with insulation resistance test (≥100MΩ @500VDC input/output to ground). Full test specification is shown on the approval sheet.

If my product fails during EMC testing after using VIP4 filters, can you provide technical support?

Yes, our in-house EMC engineering team can offer technical support. Please share your test report, application condition and circuit information, we will analyze and give suggestions for improvement or model adjustment.

Could you help select proper VIP-series filter model for my specific application such as inverter, servo drive or control cabinet?

Sure. Please provide key information including working voltage, rated current, equipment type, main noise frequency and installation condition. Our team will help you pick the most suitable filter solution for your system.

Partner with the best.

E-MAIL US

vip6@szviip.com

SUPPORT 24/7

+86 19925448748

CONTACT PERSON

Vicky Lee