VIP4‑2B‑10 (10307) is a single phase two stage EMI power filter developed for AC power line electromagnetic interference suppression. It works under rated voltage 115 250VAC with 50 60Hz operating frequency and supports 10A RMS Max continuous working current.
This filter adopts two stage filtering circuit structure. Under 50 Ohm test system it delivers excellent insertion loss for both common mode noise and differential mode noise across 0.15MHz to 30MHz frequency range. It can effectively filter conducted noise on power lines and improve the EMC performance of end devices.
It owns reliable electrical safety performance. The line to ground hi pot rating reaches 2000VAC and line to line hi pot rating reaches 500VDC for one minute test. Insulation resistance is above 100M Ohm at 500VDC. Leakage current is well controlled for different working voltage conditions. The working temperature covers from minus 25 degree Celsius to plus 100 degree Celsius to adapt to diverse working environmen

VIP4‑2B‑10 (10307) is a single phase two stage EMI power filter developed for AC power line electromagnetic interference suppression. It works under rated voltage 115 250VAC with 50 60Hz operating frequency and supports 10A RMS Max continuous working current.
This filter adopts two stage filtering circuit structure. Under 50 Ohm test system it delivers excellent insertion loss for both common mode noise and differential mode noise across 0.15MHz to 30MHz frequency range. It can effectively filter conducted noise on power lines and improve the EMC performance of end devices.
It owns reliable electrical safety performance. The line to ground hi pot rating reaches 2000VAC and line to line hi pot rating reaches 500VDC for one minute test. Insulation resistance is above 100M Ohm at 500VDC. Leakage current is well controlled for different working voltage conditions. The working temperature covers from minus 25 degree Celsius to plus 100 degree Celsius to adapt to diverse working environmen

VIP4‑2B‑10 (10307) is a single phase two stage EMI power filter developed for AC power line electromagnetic interference suppression. It works under rated voltage 115 250VAC with 50 60Hz operating frequency and supports 10A RMS Max continuous working current.
This filter adopts two stage filtering circuit structure. Under 50 Ohm test system it delivers excellent insertion loss for both common mode noise and differential mode noise across 0.15MHz to 30MHz frequency range. It can effectively filter conducted noise on power lines and improve the EMC performance of end devices.
It owns reliable electrical safety performance. The line to ground hi pot rating reaches 2000VAC and line to line hi pot rating reaches 500VDC for one minute test. Insulation resistance is above 100M Ohm at 500VDC. Leakage current is well controlled for different working voltage conditions. The working temperature covers from minus 25 degree Celsius to plus 100 degree Celsius to adapt to diverse working environmen

Wide test bandwidth covering 1 MHz to 500 MHz for comprehensive impedance characterization
Compliant with RoHS and REACH standards, suitable for worldwide export‑oriented electronic projects
Strict visual appearance defect‑limit criteria to guarantee mechanical reliability during assembly and mass production
Excellent match for circuit EMC debugging, power filter and common‑mode choke solutions
Complete official approval sheet available for customer qualification audit and project documentation

Suitable for switching power supply, consumer electronics and data‑communication equipment applications
Strict raw‑material quality control, reduces performance deviation across different production batches
Can cooperate with other EMI filter components to build complete system‑level noise reduction solutions
Stable impedance output performance, offers reliable noise‑suppression capability for high‑interference environments

Flexible application scenarios, works for cable noise suppression as well as circuit‑level EMC optimization
  Great helper for EMC debugging, assists hardware engineers to pass EMC certification tests smoothly
  Uniform ferrite material density, minimizes hidden defects such as internal micro‑cracks inside cores
  Stable remanence of 150 mT, predictable magnetic response under cyclic current variation

Adopts graded appearance defect control standard for stable mass‑production quality output
Toroidal gap‑free structure, delivers better magnetic performance compared with split‑type magnetic cores
RoHS and REACH fully compliant, meets environmental requirements for global export electronic products
ferrite core, toroidal ferrite core, mn‑zn ferrite core, EMI ferrite core, anti‑interference ferrite core

Low relative loss factor, effectively reduces heat accumulation during high‑frequency continuous operation
Low coercivity design, cuts internal magnetic hysteresis loss and improves system energy efficiency
High electrical resistivity, suppresses eddy‑current loss and optimizes high‑frequency working performance
Capable of suppressing both common‑mode and differential‑mode high‑frequency EMI and RFI interference

V18039FJ amorphous magnetic ring adopts premium 1K107B amorphous alloy material. It achieves high initial permeability of 80000 and saturation magnetic flux density up to 1250 mT. With wide working temperature range from ‑50℃ to 150℃ and high Curie temperature of 570℃, this core maintains stable magnetic performance under complex operating conditions.
Benefiting from outstanding anti‑DC bias property and low magnetostriction coefficient, this magnetic ring delivers superior common‑mode noise suppression capability. It is well‑suited for high‑power power electronic equipment. Strict quality control guarantees stable batch performance. Sample testing and customized services are offered to meet various project requirements.

V18039FJ amorphous magnetic ring adopts premium 1K107B amorphous alloy material. It achieves high initial permeability of 80000 and saturation magnetic flux density up to 1250 mT. With wide working temperature range from ‑50℃ to 150℃ and high Curie temperature of 570℃, this core maintains stable magnetic performance under complex operating conditions.
Benefiting from outstanding anti‑DC bias property and low magnetostriction coefficient, this magnetic ring delivers superior common‑mode noise suppression capability. It is well‑suited for high‑power power electronic equipment. Strict quality control guarantees stable batch performance. Sample testing and customized services are offered to meet various project requirements.

Wide test bandwidth covering 1 MHz to 500 MHz for comprehensive impedance characterization
Compliant with RoHS and REACH standards, fit for global export electronic projects
Strict visual appearance defect criteria to ensure reliable mechanical strength during assembly
Perfect for circuit EMC debugging together with EMI filter solutions

V18039FJ amorphous magnetic ring adopts premium 1K107B amorphous alloy material. It achieves high initial permeability of 80000 and saturation magnetic flux density up to 1250 mT. With wide working temperature range from ‑50℃ to 150℃ and high Curie temperature of 570℃, this core maintains stable magnetic performance under complex operating conditions.
Benefiting from outstanding anti‑DC bias property and low magnetostriction coefficient, this magnetic ring delivers superior common‑mode noise suppression capability. It is well‑suited for high‑power power electronic equipment. Strict quality control guarantees stable batch performance. Sample testing and customized services are offered to meet various project requirements.