2F building D Mao yuan industry area, Huan guan south road,
Guan hu street, Long hua district, Shenzhen city
The world's leading manufacturer of power filters.
V180279H EMI Suppression Ferrite Core, High Saturation Magnetic Core for Power Supply and Data Communication Noise Reduction
V180279H EMI Suppression Ferrite Core for Power & Data Noise Reduction
The V180279H is a toroidal gap-free Ni-Zn ferrite EMI suppression core manufactured by Shenzhen VIIP Electronics Co., Ltd, dedicated to EMC high-frequency noise suppression. This high-performance magnetic component effectively attenuates high-frequency electromagnetic interference inside electronic circuits and wiring harnesses, fully complying with RoHS & REACH environmental requirements.
Impedance performance is validated by production sample test data, covering noise-attenuation frequency range from 1 MHz to 500 MHz. Its closed toroidal magnetic-path structure delivers stable broadband EMI filtering performance for cable harness and PCBA-level EMC optimization.
5.0
design customization
Please fill out the form below to request a quote or to request more information about us. Please be sure to upload customized requirement documents or pictures, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
inlet socket
9.5mm
V180279H Mn-Zn Ferrite Core, EMI RFI Noise Suppression Toroid Core, RoHS REACH Certified for EMC Filter Solution
The V180279H is a toroidal gap-free Ni-Zn ferrite EMI suppression core manufactured by Shenzhen VIIP Electronics Co., Ltd, dedicated to EMC high-frequency noise suppression. This high-performance magnetic component effectively attenuates high-frequency electromagnetic interference inside electronic circuits and wiring harnesses, fully complying with RoHS & REACH environmental requirements.
Impedance performance is validated by production sample test data, covering noise-attenuation frequency range from 1 MHz to 500 MHz. Its closed toroidal magnetic-path structure delivers stable broadband EMI filtering performance for cable harness and PCBA-level EMC optimization.
- Suitable for switching power supply, consumer electronics and data‑communication equipment applications
- Strict raw‑material quality control, reduces performance deviation across different production batches
- Can cooperate with other EMI filter components to build complete system‑level noise reduction solutions
- Stable impedance output performance, offers reliable noise‑suppression capability for high‑interference environments
| Item | Specification |
|---|---|
| Test instrument | E4991A + 16194A |
| Test frequency range | 1 MHz ~ 500 MHz |
| Test winding fixture | Ø0.5*0.5TS*100L(mm) |
| Min. Impedance @25 MHz | ≥ 70 Ω |
| Min. Impedance @100 MHz | ≥ 150 Ω |
Impedance-vs-frequency test curve is attached in the official approval sheet for reference.
| Parameter | Value |
|---|---|
| Material Grade | VN02 Ni-Zn Ferrite |
| Initial permeability μi | 650 (±20%) |
| Relative Loss Factor tanδ/μi | 20 @ 0.1 MHz |
| Saturation magnetic flux density Bs | 330 mT @1600 A/m |
| Remanence Br | 150 mT |
| Curie temperature Tc | ＞105 °C |
| Density | 4.6 g/cm³ |
| Dimension B | 28.5 ±0.8 mm |
Note: Dimension A & C are reserved on the approval sheet; please refer to original drawing for full dimension data.
- Industrial field-bus signal cable EMI suppression
- Building smart & fire alarm device noise filtering
- Robot internal wiring & micro-actuator anti-interference
- Data acquisition & RS485 communication harness EMC optimization
- Low-energy storage auxiliary power noise attenuation
- Lab test & measurement equipment cable noise suppression
- Consumer electronics power cable and PCBA high-frequency noise mitigation
Can I get free samples for H-series ferrite cores?
Yes, we can provide free H-series ferrite core samples for your performance testing and product evaluation.
What is your regular order requirement for ferrite cores?
Normally mass orders need to comply with our minimum package quantity requirement.
Does the free-sample policy allow small-quantity orders below MOQ for regular purchases?
Free samples are only intended for performance verification. While your first trial order can be negotiated, formal repeat orders must follow our minimum package quantity rule.
What certificates do H-series ferrite cores have?
Our H-series ferrite cores meet RoHS and REACH regulatory requirements.
What is the typical production lead-time for mass-production ferrite core orders?
Typical production lead-time ranges from 2 to 5 weeks, subject to order volume and stock status. Exact lead-time will be confirmed prior to your formal order placement.
Can you customize impedance, physical dimensions or material for H-type ferrite cores?
Customization service is available based on your detailed technical specifications. A dedicated MOQ will apply for all customized ferrite core projects.
Could you provide EMC technical support when I apply your ferrite cores in my projects?
Sure. Our in-house engineering team provides basic EMC technical consultation to assist you with noise-suppression design and circuit debugging work.
What applications are H-series ferrite cores suitable for?
H-series Ni-Zn ferrite cores are widely used for EMI / EMC noise suppression on PCBA traces, wiring harnesses, power cables, consumer electronics, power supplies and communication-related equipment.
{{item.score}} Stars
{{item.pre}}%
{{item.nickname ? (item.nickname.slice(0, 2) + '*****') : item.source === 1 ? 'mall buyer' : '--'}}
{{item.comment_time}}
Review in the {{item.country}}
{{itemAttr.params_key}}: {{itemAttr.params_value}}
Partner with the best.
Related Products
Ready to work with us ?
Shenzhen VIIP Electronics Co., Ltd. is a professional EMC service provider. Mainly focusing on the R & D, production and sales of EMC anti-interference components.
Useful Links
Products
Contact Us
Contact person: Vicky Lee
Tel: +86 19925448748
WhatsApp：86-18003057179