EMC Export Troubles? This 3-in-1 Dual-Fuse Filter Passes First Try

Struggling with EMC Compliance for Export? This 3-in-1 Dual-Fuse Filter Gets It Right the First Time

           When exporting precision equipment to the EU, North America, or Southeast Asia, many manufacturers hit the same wall: the product runs flawlessly in the lab, but fails EMC compliance testing on site — random reboots, signal distortion, data errors.

The root cause usually isn't the main circuit. It's conducted electromagnetic interference (EMI) through the power line. Built-in filters are typically designed for ideal lab conditions. Throw in real-world variables — temperature swings, long cables, noisy power grids — and they simply fall short. The result: failed tests, shipment delays, costly redesigns.

Why Choose VIIP VIP1-1E-06?

With 15 years focused exclusively on EMC, we know this pain point inside out. The VIP1-1E-06 was built for passing compliance the first time:

🔹 3-in-1 Integrated Design + Dual Fuse​ — IEC inlet, switch, and dual fuse holders in one unit. Simplifies assembly and adds a critical safety redundancy.

🔹 Strong Filtering Performance​ — Common-mode insertion loss 20–32 dB, differential-mode up to 55 dB (0.15–30 MHz), targeting the exact frequency bands compliance tests care about most.

🔹 Stable Across Wide Temperatures​ — Operating range -25°C to +100°C, leakage current as low as 0.2μA (@115V), no drift under heat.

🔹 Metal Housing = Faraday Cage​ — Built-in shielding blocks external interference, eliminating the need for extra shielded enclosures.

🔹 Full Global Certifications​ — CQC / cULus / CE / CB / REACH / RoHS. One filter, all major markets covered.

Key Specifications at a Glance:

• Model: VIP1-1E-06 (Part No. B011X0412)

• Rated Current: 6A RMS Max @ 115/250VAC

• Rated Voltage: 115/250VAC, 50/60Hz

• Hi-Pot Test: 2000VAC (L-GND) / 500VDC (L-L), 1 min

• Insulation Resistance: >100MΩ @ 500VDC

Ideal For

Medical Instruments · Test & Measurement Equipment · Industrial Automation Controllers · Communication Systems · High-End Consumer Electronics

VIIP (Shenzhen WeiAiPu Electronics) specializes in EMI filters, ferrite cores, and EMC design & debugging consulting — helping thousands of manufacturers achieve compliance, certification, and on-time shipment.