Dc Emi Power Line Filter Series

Our company anti-interference magnetic core production, the international advanced automatic magnetic material production testing line. EMI FERRITE CORE products a total of more than 300 kinds of specifications models to meet the needs of different products. All products are in line with ROHS, REACH environmental requirements. Most of the products are exported to Europe, America, Japan and South Korea, Southeast Asia and other countries and regions.

EMI FILTER products are in line with CQC, UL, VDE, CE and other safety certification requirements. Products into a comprehensive ROHS, REACH environmental requirements. Product specifications complete, the current from 0.1A-3000A. There are a variety of different installation and connection for customers to choose, accepting custom design according to the customers’ special requirements.

Innovation affects the future! We warmly welcome you to contact us and common progress for a better tomorrow!

In the development and testing of computer hardware, EMC magnetic rods can simulate various electromagnetic radiation scenarios, including static fields, magnetic fields, electric fields, etc. By placing the magnetic rod close to computer hardware, developers can test the hardware's radiation and sensitivity performance in different electromagnetic environments. This is crucial for ensuring the normal operation of computer hardware in real-world environments, especially in scenarios with significant electromagnetic interference, such as industrial automation environments and military systems.

In the development and testing of computer software, EMC magnetic rods can simulate interference signals in different electromagnetic environments. Developers can connect the magnetic rod to the computer system and introduce various interference signals to test the software's resistance to interference. This is vital for testing the robustness and stability of software, especially when computer systems face various electromagnetic interferences in real-life situations.

Apart from hardware and software development and testing, EMC magnetic rods also play a crucial role in computer maintenance and troubleshooting. When a computer malfunctions, it is often challenging to determine whether it is a hardware, software, or electromagnetic interference issue. By using EMC magnetic rods, technicians can expose the computer to different electromagnetic environments to determine whether the fault is due to hardware, software, or electromagnetic interference.





In conclusion, EMC magnetic rods are extensively applied in the computer field, helping developers ensure that computer hardware and software operate normally in various electromagnetic environments. They also assist technicians in troubleshooting computer faults, playing a key role in enhancing the reliability and stability of computer systems, which is crucial for ensuring the security and reliable operation of computer systems. Therefore, EMC magnetic rods are indispensable tools in the computer industry.

Shenzhen VIIP Electronic Co., Ltd. is an electromagnetic compatibility service provider primarily engaged in the research, production, and sale of EMC anti-interference components. Its main products include power filters, EMI anti-interference magnetic cores, amorphous magnetic ring inductor series, and EMC shielding materials. The company has a production base for anti-interference magnetic cores and a fully automated magnetic material production testing line. There are over 300 specifications and models of anti-interference magnetic core products to meet various product requirements.

So, how can the performance of power filters be tested?


Leakage Current

Leakage current refers to the current flowing between the phase line, neutral line, and the filter casing (ground line) under a voltage of 250VAC. It primarily depends on the value of the ground capacitor (common mode capacitor). A larger common mode capacitor CY can improve insertion loss but may result in higher leakage current.


Withstand Voltage

To ensure the performance of the power filter, as well as the safety of equipment and personnel, withstand voltage testing must be conducted. Withstand voltage testing is performed under extreme operating conditions. If the withstand voltage performance of the CX capacitor is poor, it may break down when peak surge voltage occurs. While its breakdown may not endanger personal safety, it can cause the filter to lose functionality or performance.


Performance Evaluation

When using EMI power filters, the most important considerations are the rated voltage and current values, withstand voltage performance, and leakage current. The primary performance evaluation of a filter is its insertion loss performance.

The ability of an EMI power filter to suppress interference noise is measured using Insertion Loss (I.L.). Insertion loss is defined as the ratio of the power P1 transmitted from the noise source to the load without the filter connected to the power P2 transmitted from the noise source to the load with the filter connected, expressed in decibels (dB).


Standard Insertion Loss Testing
Load Insertion Loss Testing
Time Domain Testing for EMI Filters


Design of an Automatic Insertion Loss Testing System for EMI Filters

As EMC testing becomes more complex and the workload increases, the requirements for testing equipment in terms of functionality, performance, testing speed, and accuracy are also rising. Traditional manual testing is increasingly unable to meet these requirements. National standards (GB) and national military standards (GJB) both require EMC testing to be automated, with strict requirements for data post-processing. Therefore, the development of EMC automatic testing has become essential. The automatic testing system established in this article utilizes virtual instrument technology and is based on a signal source and spectrum analyzer to test the insertion loss of EMI power filters.

Power filters are essential components in electronic devices, with the main function of filtering the input power signal to remove noise and other interference, providing a stable and smooth direct current or alternating current voltage to ensure the normal operation of electronic devices. Power filters are widely used in electronic products, especially in high-end electronic products that require signal stability, reliability, and safety.

In addition to the main functions and roles mentioned above, power filters can also serve the following purposes:


Filter out high-frequency noise in the input power, reduce interference to the system, and minimize electromagnetic radiation.
Prevent transient changes in the power supply circuit to avoid impacting the system.
Avoid sudden surges in the power line to enhance system reliability and stability.

So, how can the performance of power filters be tested?


Leakage Current

Leakage current refers to the current flowing between the phase line, neutral line, and the filter casing (ground line) under a voltage of 250VAC. It primarily depends on the value of the ground capacitor (common mode capacitor). A larger common mode capacitor CY can improve insertion loss but may result in higher leakage current.


Withstand Voltage

To ensure the performance of the power filter, as well as the safety of equipment and personnel, withstand voltage testing must be conducted. Withstand voltage testing is performed under extreme operating conditions. If the withstand voltage performance of the CX capacitor is poor, it may break down when peak surge voltage occurs. While its breakdown may not endanger personal safety, it can cause the filter to lose functionality or performance.


Performance Evaluation

When using EMI power filters, the most important considerations are the rated voltage and current values, withstand voltage performance, and leakage current. The primary performance evaluation of a filter is its insertion loss performance.

The ability of an EMI power filter to suppress interference noise is measured using Insertion Loss (I.L.). Insertion loss is defined as the ratio of the power P1 transmitted from the noise source to the load without the filter connected to the power P2 transmitted from the noise source to the load with the filter connected, expressed in decibels (dB).


Standard Insertion Loss Testing
Load Insertion Loss Testing
Time Domain Testing for EMI Filters


Design of an Automatic Insertion Loss Testing System for EMI Filters

As EMC testing becomes more complex and the workload increases, the requirements for testing equipment in terms of functionality, performance, testing speed, and accuracy are also rising. Traditional manual testing is increasingly unable to meet these requirements. National standards (GB) and national military standards (GJB) both require EMC testing to be automated, with strict requirements for data post-processing. Therefore, the development of EMC automatic testing has become essential. The automatic testing system established in this article utilizes virtual instrument technology and is based on a signal source and spectrum analyzer to test the insertion loss of EMI power filters.

I. Basic Principles of Three-Phase AC Filters

A three-phase AC filter is a device used to filter specific frequency harmonics in three-phase AC power. Its basic principle involves using components such as inductors and capacitors to form a resonant circuit that absorbs or suppresses specific frequency harmonics, thereby improving power quality. Three-phase AC filters are typically composed of multiple single-phase filters to adapt to the characteristics of three-phase AC power.

II. Classification of Three-Phase AC Filters

Three-phase AC filters can be classified into two main categories: passive filters and active filters, based on their filtering principles and application scenarios.


Passive Filters: These filters are primarily composed of passive components such as inductors, capacitors, and resistors. They have a simple structure, low cost, and are suitable for scenarios with low harmonic content and less demanding filter performance.
Active Filters: These filters work by detecting harmonic currents in the power grid and generating compensating currents that are opposite in phase to eliminate the harmonics. Active filters have advantages such as fast response and good filtering effects, but their cost is relatively high.

III. Applications of Three-Phase AC Filters

Three-phase AC filters have a wide range of applications in power systems, including the following aspects:


Harmonic Mitigation: In power systems, various nonlinear loads (such as rectifiers and inverters) can generate substantial harmonic currents that threaten the stable operation of the grid and the safety of equipment. Installing three-phase AC filters can effectively filter out these harmonic currents, improving power quality.
Power Factor Correction: Some power electronic devices generate reactive power during operation, resulting in a lowered power factor in the grid. Three-phase AC filters can compensate for reactive power, improving the power factor and reducing line losses.
Voltage Fluctuation Suppression: In power grids, voltage may fluctuate due to load changes or faults. Three-phase AC filters can adjust their parameters to suppress voltage fluctuations and enhance grid stability.

IV. Design and Optimization of Three-Phase AC Filters

To meet the needs of different power systems, the design and optimization of three-phase AC filters are particularly important. During the design process, it is crucial to consider factors such as the harmonic characteristics of the power grid, types of loads, and filter costs, to select suitable filter types, parameters, and topologies. Additionally, simulation analysis and experimental validation of the filters are necessary to ensure good filtering performance and stability in practical applications.

V. Conclusion

As key components in power systems, three-phase AC filters play an essential role in ensuring power quality and suppressing harmonic interference. With the continuous development of power electronic technology and the expanding application fields, the design and optimization of three-phase AC filters will gain increasing attention. Looking ahead, we have reason to believe that three-phase AC filters will play an even more important role in power systems, contributing significantly to the prosperity and development of the electricity sector.