V18007H is Ni‑Zn ferrite core made of VN02 material. Its dimension: outer diameter 3.5±0.3 mm, height 5.0±0.4 mm, inner diameter 1.8±0.3 mm. With initial permeability 650, it delivers excellent high‑frequency impedance performance, minimum impedance 20Ω at 25 MHz and 40Ω at 100 MHz, effectively suppressing EMI and RFI high‑frequency noise for cables. It features Curie temperature above 140℃ and high resistivity with stable magnetic property. Strict visual defect inspection is implemented. Widely applied for signal wires, data cables and wiring harness of compact electronic devices. Sample and bulk orders are available, RoHS compliant.

Broad operating temperature range Stable performance under normal working environment, adaptable for diverse indoor & outdoor electronic equipment working conditions.
Low loss at high frequency band Low high‑frequency loss characteristic, will not cause extra signal attenuation for normal signal transmission.
Excellent mechanical stability Well‑finished surface after grinding process, good shock‑resistance, not easy to crack in regular assembly & application.
Consistent ferrite formula Stable raw‑material formula control, reduce performance deviation among different production lots.

Perfect for EMC debug & noise solution Ideal for EMC design debugging, solve conducted & radiated interference issues of power and signal lines.
Factory direct supply & flexible support Manufacturer supply, support bulk order, can offer EMC technical consulting service.

V18007H is Ni‑Zn ferrite core made of VN02 material. Its dimension: outer diameter 3.5±0.3 mm, height 5.0±0.4 mm, inner diameter 1.8±0.3 mm. With initial permeability 650, it delivers excellent high‑frequency impedance performance, minimum impedance 20Ω at 25 MHz and 40Ω at 100 MHz, effectively suppressing EMI and RFI high‑frequency noise for cables. It features Curie temperature above 140℃ and high resistivity with stable magnetic property. Strict visual defect inspection is implemented. Widely applied for signal wires, data cables and wiring harness of compact electronic devices. Sample and bulk orders are available, RoHS compliant.

Compliant with RoHS & REACH standard Meet environmental protection requirements, safe for consumer electronics and industrial device export.
Strict dimensional & appearance inspection Controlled dimension tolerance, standardized appearance defect criteria, consistent batch‑to‑batch quality.
Complete test report available Tested by E4991A+16194A impedance analyzer, original specification approval sheet can be provided.

High‑frequency impedance performance Minimum impedance 45Ω@25MHz, 80Ω@100MHz, test range 1‑500MHz, excellent for suppressing high‑frequency EMI/RFI noise.
VN09 Ni‑Zn soft ferrite material Adopt VN09 nickel‑zinc ferrite material, high saturation flux density, Curie temperature＞105℃, stable working performance.
19mm inner bore size Inner diameter 19mm, fit for passing larger power cables, widely used for wire harness noise filtering.

Optimized for multi‑wire winding process The toroidal inner space supports multi‑strand enameled wire winding. Suitable for making high‑performance common‑mode inductors to meet different power‑level filter design needs.
Stable anti‑interference capability under variable load Magnetic performance maintains steady when end‑equipment load changes. The filtering effect will not deteriorate under unstable working current conditions.
Stable anti‑interference capability under variable load Magnetic performance maintains steady when end‑equipment load changes. The filtering effect will not deteriorate under unstable working current conditions.

Smooth Burr‑Free Ring Surface Fine‑polished surface treatment avoids scratching enameled wire insulation during manual or machine winding. Greatly decrease hidden short‑circuit risks of finished choke coils.
Less Winding Turns for Target Inductance Good soft‑magnetic property helps designers reach target inductance value with fewer winding turns. Save copper wire consumption and shrink the overall size of finished filter inductors.

High Ferrite Material Utilization Rate Closed toroidal magnetic circuit minimizes magnetic leakage flux. More of the magnetic material works for noise attenuation instead of magnetic waste, improving actual filtering effect.
Strict In‑house Production Inspection Multi‑step inspection from raw material to finished goods. Each production lot is sampled for impedance test to guarantee consistent quality for overseas export projects.

V19006 is a high‑performance snap‑on clip‑on ferrite core manufactured from VN09 grade Ni‑Zn ferrite material. It achieves minimum impedance of 115 Ω at 25 MHz and 210 Ω at 100 MHz to effectively suppress high‑frequency EMI and RFI noise on power and signal cables.
Benefiting from controlled dimensional tolerances and rigorous appearance inspection standards, this split ferrite features tool‑free quick installation without cutting or stripping cables. With high Curie temperature and high resistivity, it maintains stable magnetic output under long‑term continuous operation.
Complying with RoHS and REACH standards, V19006 supports mass‑volume delivery. It serves both new product development and post‑production EMC rectification for industrial control, new‑energy, communication and consumer electronic equipment, helping end devices pass EMC compliance tests with low modification cost.

Help Shorten EMC Debug Cycle Reliable and stable magnetic parameters provide solid foundation for filter design. Reduce repeated debugging work and help products pass EMC compliance tests efficiently.
Flexible Procurement Support Factory direct supply, support sample evaluation for performance verification. Meet requirements from small‑batch prototype testing to large‑volume industrial mass orders.

V19006 is a high‑performance snap‑on clip‑on ferrite core manufactured from VN09 grade Ni‑Zn ferrite material. It achieves minimum impedance of 115 Ω at 25 MHz and 210 Ω at 100 MHz to effectively suppress high‑frequency EMI and RFI noise on power and signal cables.
Benefiting from controlled dimensional tolerances and rigorous appearance inspection standards, this split ferrite features tool‑free quick installation without cutting or stripping cables. With high Curie temperature and high resistivity, it maintains stable magnetic output under long‑term continuous operation.
Complying with RoHS and REACH standards, V19006 supports mass‑volume delivery. It serves both new product development and post‑production EMC rectification for industrial control, new‑energy, communication and consumer electronic equipment, helping end devices pass EMC compliance tests with low modification cost.