2F building D Mao yuan industry area, Huan guan south road,
Guan hu street, Long hua district, Shenzhen city
The world's leading manufacturer of power filters.
Ni-Zn Ferrite Core V18033H High Impedance EMC EMI Noise Suppression Ferrite for Cable PCBA Wiring Harness RoHS REACH Compliant
Ni-Zn Ferrite Core V18033H for EMC EMI Noise Suppression
The V18033H is a toroidal gap‑free Ni‑Zn ferrite EMI suppression core manufactured by Shenzhen VIIP Electronics Co., Ltd, dedicated to EMC high‑frequency noise suppression. This high‑performance magnetic component effectively attenuates high‑frequency electromagnetic interference inside electronic circuits and wiring harnesses, fully complying with RoHS & REACH environmental requirements.
Impedance performance is validated by production sample test data, covering noise‑attenuation frequency range from 1 MHz to 500 MHz. Its closed toroidal magnetic‑path structure delivers stable broadband EMI filtering performance for cable harness and PCBA‑level EMC optimization. Full‑set test records and impedance‑frequency curve are documented in the official Rev.4.0 approval sheet (Doc No.6080024125) for engineering reference.
5.0
design customization
Please fill out the form below to request a quote or to request more information about us. Please be sure to upload customized requirement documents or pictures, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
Ni‑Zn H‑Type Ferrite Core V18033H High Impedance EMC EMI Noise Suppression for PCBA Wiring Harness
Product Overview
The V18033H is a toroidal gap‑free Ni‑Zn ferrite EMI suppression core manufactured by Shenzhen VIIP Electronics Co., Ltd, dedicated to EMC high‑frequency noise suppression. This high‑performance magnetic component effectively attenuates high‑frequency electromagnetic interference inside electronic circuits and wiring harnesses, fully complying with RoHS & REACH environmental requirements.
Impedance performance is validated by production sample test data, covering noise‑attenuation frequency range from 1 MHz to 500 MHz. Its closed toroidal magnetic‑path structure delivers stable broadband EMI filtering performance for cable harness and PCBA‑level EMC optimization.
Key Features
- Supports pre‑production sample evaluation to verify real‑world EMC filtering performance before mass production orders
- Mature sintering & machining manufacturing process, supports large‑volume OEM & ODM electronic manufacturing orders
- Compact dimension design, suitable for signal line and low‑power power‑cable noise‑suppression scenarios
- Excellent batch‑to‑batch performance consistency, minimizes impedance fluctuation across different production lots
- Strict visual defect inspection criteria to guarantee mechanical reliability for end‑product assembly
- Ideal for compact power adapters, consumer electronics, data‑communication hardware and miniature IoT devices
Electrical Characteristics
| Item | Specification |
|---|---|
| Test instrument | E4991A + 16194A |
| Test frequency range | 1 MHz ~ 500 MHz |
| Test winding fixture | Ø0.5*0.5TS*100L(mm) |
| Min. Impedance @25 MHz | ≥20 Ω |
| Min. Impedance @100 MHz | ≥50 Ω |
Impedance‑vs‑frequency test curve is attached in the official approval sheet for reference.
Material & Physical Properties
| Parameter | Value |
|---|---|
| Material Grade | VN02 Ni‑Zn Ferrite |
| Initial permeability μi | 650 (±20%) |
| Relative Loss Factor tanδ/μi | 20*10⁻⁶ @0.1 MHz |
| Saturation magnetic flux density Bs | 260 mT @1600 A/m |
| Remanence Br | 150 mT |
| Coercivity Hc | 35 A/m |
| Curie temperature Tc | >140 °C |
| Resistivity | >10 Ω·m |
| Density | 4.9 g/cm³ |
| Dimension A | 6.0±0.2 mm |
| Dimension B | 10.0±0.3 mm |
| Dimension C | 4.0±0.2 mm |
Applications
- EMI noise suppression for small‑size signal cables, sensor wiring and internal device harness
- Anti‑interference treatment for consumer electronics, smart home equipment and portable instrument signal lines
- High‑frequency noise filtering for handheld test devices, IoT modules and wireless peripheral cables
- Conducted interference reduction for small‑size power adapters and low‑power control boards
- EMC optimization for miniature industrial sensors, security monitoring equipment harness
- High‑reliability cable EMI suppression for medical small‑size auxiliary equipment
Product Images
Frequently Asked Questions
Can I get free samples for H-series ferrite cores?
Yes, we can provide free H-series ferrite core samples for your performance testing and product evaluation.
What is your regular order requirement for ferrite cores?
Normally mass orders need to comply with our minimum package quantity requirement.
Does the free-sample policy allow small-quantity orders below MOQ for regular purchases?
Free samples are only intended for performance verification. While your first trial order can be negotiated, formal repeat orders must follow our minimum package quantity rule.
What certificates do H-series ferrite cores have?
Our H-series ferrite cores meet RoHS and REACH regulatory requirements.
What is the typical production lead-time for mass-production ferrite core orders?
Typical production lead-time ranges from 2 to 5 weeks, subject to order volume and stock status. Exact lead-time will be confirmed prior to your formal order placement.
Can you customize impedance, physical dimensions or material for H-type ferrite cores?
Customization service is available based on your detailed technical specifications. A dedicated MOQ will apply for all customized ferrite core projects.
Could you provide EMC technical support when I apply your ferrite cores in my projects?
Sure. Our in-house engineering team provides basic EMC technical consultation to assist you with noise-suppression design and circuit debugging work.
What applications are H-series ferrite cores suitable for?
H-series Ni-Zn ferrite cores are widely used for EMI / EMC noise suppression on PCBA traces, wiring harnesses, power cables, consumer electronics, power supplies and communication-related equipment.
{{item.score}} Stars
{{item.pre}}%
{{item.nickname ? (item.nickname.slice(0, 2) + '*****') : item.source === 1 ? 'mall buyer' : '--'}}
{{item.comment_time}}
Review in the {{item.country}}
{{itemAttr.params_key}}: {{itemAttr.params_value}}
Partner with the best.
Related Products
Ready to work with us ?
Shenzhen VIIP Electronics Co., Ltd. is a professional EMC service provider. Mainly focusing on the R & D, production and sales of EMC anti-interference components.
Useful Links
Products
Contact Us
Contact person: Vicky Lee
Tel: +86 19925448748
WhatsApp：86-18003057179